← Back to blog

Workflow Bottlenecks: How to Find Them and Fix What Slows Your Team

November 22, 2026
Workflow Bottlenecks: How to Find Them and Fix What Slows Your Team

A workflow bottleneck is the one step in a process where work arrives faster than it can be handled. Everything behind it waits, and the whole process can only move as fast as that step. The fix is rarely "work harder" or "buy another tool". You find the constraint, work out whether it is a shortage of capacity or a dependency between tasks, and then redesign that step so it stops holding everything else back. When the constraint lives in disconnected systems, manual handoffs or approvals that nobody can see, custom software and workflow automation built around your own process is what removes it. That is the work we do at Proud Lion Studios.

Proud Lion Studios
Clear Workflow Bottlenecks With Custom Software
Proud Lion Studios builds tailored software and workflow automation to address recurring bottlenecks across disconnected systems and manual handoffs.
Visit

TL;DR

  • A bottleneck is the step with the least capacity. Speeding up any other step changes little and often just piles work up in front of the constraint.
  • There are two kinds: resource bottlenecks (not enough people, machines or system capacity) and task bottlenecks (a step waiting on another step, such as an approval). They need different fixes.
  • Find the bottleneck by mapping the flow, measuring queues and waiting time between steps, and looking at where work piles up.
  • Automation helps most at handoffs, but only after you redesign the flow. Putting AI on a broken process makes it fail faster.
  • For recurring, system-level bottlenecks, a tailored workflow tool or AI agent usually beats stacking more off-the-shelf subscriptions.

Table of Contents

What a workflow bottleneck actually is

Think of the narrow neck of a bottle. Liquid can only leave as fast as the neck allows, no matter how large the bottle is. Atlassian's project management guide describes workflow bottlenecks the same way: a point where limited capacity makes work pile up and slows the entire process. The same guide points out that a team that is efficient on 90% of its tasks still suffers badly if the last 10% sits waiting at a constraint.

The Harvard Business School operations workbook gives the cleanest rule. In a chain of dependent steps, the step with the longest cycle time is the bottleneck and sets the speed of the whole operation. Its example is a laundry line where the dryer limits everything. Adding capacity to the bottleneck often raises capacity for the entire line. Speeding up a step that is not the bottleneck may have no effect at all, and it can even build up work in progress waiting behind the constraint.

What a workflow bottleneck actually is

A quick worked example

Suppose a customer onboarding flow has three steps. The data entry team can handle 40 requests a day, the compliance review can handle 12, and the account setup can handle 30. This is an illustrative example, not a measured case. The process delivers 12 completed onboardings a day, whatever the other two teams do. If you hire two more data entry clerks, you get zero extra onboardings and 28 more requests a day piling up in the review queue. If you raise the review step from 12 to 20, output rises to 20 a day, and the setup step becomes the next constraint at 30.

Onboarding capacity bottleneck and next constraint

This is why teams that are "busy" everywhere still ship slowly. Output ahead of the bottleneck looks like productivity, but it is just inventory waiting.

Two kinds of bottleneck, two different fixes

Before choosing a remedy, classify what you are dealing with. Research from MIT Sloan Management Review (Karim, Lee and Hoehn-Weiss, December 2024) separates task bottlenecks from resource bottlenecks:

TypeWhat it looks likeTypical exampleWhat usually helps
Resource bottleneckA needed person, machine or system is unavailable or overloadedOne specialist reviewing every contract; a database that slows at month-endAdd or share capacity, cross-train, scale the system
Task bottleneckA step cannot start until another step delivers its outputWaiting on legal, compliance or manager approvalRedesign the sequence, run steps in parallel, remove approvals that add no information

The distinction matters because the authors note that resource bottlenecks can often be solved by adding resources, while task bottlenecks often cannot. Hiring more people will not shorten an approval chain that is sequential by design.

Where the two show up in real operations

A US study of two hospital construction projects, using queuing theory, found that submittal review and approval queues drove long lead times. Actual lead time averaged 28.79 days on one project and 39.31 days on the other, with throughput of only 0.70 and 0.60 submittals a day. The cause was not slow individual work. It was waiting at a limited-capacity step, made worse by variation in arrivals and high utilization.

The same pattern appears in software businesses. Common examples include:

  • Manual data entry between systems. Someone copies orders from a storefront into a finance tool, so throughput depends on one person's day.
  • Approval steps with no visibility. Requests sit in an inbox, and nobody knows who holds them.
  • Disconnected departments. Sales, operations and support each use separate tools, so each handoff needs a message, a spreadsheet or a meeting.
  • Legacy or overloaded systems. A slow internal tool or database sets the pace for everyone who depends on it.
  • Unclear priorities. Teams chase urgent requests while the work that matters waits.

If your team lives in a shared inbox, the handoff itself can be the constraint. A practical read on how to streamline team inbox workflows shows how routing and ownership rules reduce the waiting that builds up between people.

How to find the bottleneck in your process

You do not need a consultancy to start. You need a map and some numbers. Follow these steps in order.

1. Map the flow from trigger to outcome

Write down every step a piece of work goes through, from the moment a request arrives to the moment the customer or the next team receives the result. Include the handoffs, not just the tasks. Most delay hides in the gaps between two steps, not inside them.

2. Measure waiting time, not just working time

For each step, record how long work sits before someone starts it and how long it takes once started. These are different numbers, and the first one is usually bigger. McKinsey measured a demand-to-production workflow at a Fortune 500 industrial manufacturer where six handoffs involved 9 to 18 days of coordination against only 12 to 24 hours of actual work. Delay between steps exceeded processing time by nine to 36 times. If you only time the work, you will miss the problem entirely.

3. Look for the pile

The clearest sign is a queue: tasks accumulating in one stage while the stages after it sit idle. Teams upstream of the constraint look busy and output keeps growing, but the finished count stays flat. If your tracker or board shows one column that is always full, start there.

4. Break the waiting time into causes

Not all waiting is the same. A December 2024 peer-reviewed study in Information Systems proposes splitting waiting time between activities into five direct causes: batching (work held until a group is ready), prioritization (other work goes first), contention (several tasks share one resource), unavailability (the person or system is off or out of hours) and extraneous causes. Each points to a different fix. Batching calls for smaller release cycles. Contention calls for more capacity or smarter routing. Unavailability calls for coverage or automation outside working hours.

5. Use your system data when you have it

If your work runs through software, it already leaves timestamps. Process mining uses those event logs to rebuild the real flow. A 2025 study describes a seven-step pipeline: data collection, event-log construction, process discovery, conformance checking, performance analysis, bottleneck identification and improvement recommendations. Teams without proper logs often find that the first useful result of this exercise is realizing their tools do not record who held a task, or when. That is itself a finding, and a reason to build a system that does.

6. Confirm with the people doing the work

Numbers show where, and people explain why. Ask the owner of the suspect step what they wait for, what they redo and what they work around. Then check that the step really limits end-to-end output, using the logic of the onboarding example above.

Fixing a bottleneck without moving it

The MIT Sloan authors argue that bottlenecks are best managed holistically rather than piecemeal, because fixing one often reveals that the process is still stalled by others. Their recommendations translate into a clear working order:

  1. Locate and classify each bottleneck as task-based or resource-based.
  2. Question the delay. Does the approval or review actually add information that improves the decision? If not, remove or shrink it.
  3. Shorten sequences or run steps in parallel. Modular software development, where teams build separate components at the same time, is the example the authors give.
  4. Build in slack. The authors cite JetBlue's 2007 ice-storm meltdown, which affected more than 130,000 customers, as a warning about operations designed too lean. A process running at 100% utilization has no room to absorb variation.
  5. Make resources interchangeable. If only one person can do a step, that person is a bottleneck by definition.

The 2025 process-mining study adds a useful discipline: screen proposed changes with simulation or factory-physics analysis before acting. For a worked view of how teams do this with predictive models, see this overview of employee lifecycle analytics, which shows how metrics and data turn into specific actions. Testing a change on a model first costs far less than discovering that it moved the constraint somewhere worse.

Where software and automation really help

Handoffs are where software earns its place. McKinsey describes agentic AI systems that can verify, reconcile, route and act at workflow handoffs, collapsing delay between steps from days to hours or minutes. In its manufacturer case, planning clock speed improved tenfold, from 30 days to three, and 80% of planning became touchless. Reaction time to supply shocks fell from weeks to under one day.

The same article is clear about the order of work. Teams first map the coordination work, decide what needs human judgment and what can be automated, and redesign the flow. Deploying AI on top of existing coordination patterns adds a new tool without removing the source of delay. Deloitte's 2026 State of AI report makes the same point from another angle: AI can make an inefficient process run faster while keeping the same handoffs, approvals and constraints.

In practice, that gives you a short list of places where automation pays off:

  • Routing and triage. Requests land with the right owner automatically, with priority rules applied consistently.
  • Data movement between systems. Orders, invoices and customer records flow without retyping. Our guide to invoice processing automation shows what this looks like for one common finance bottleneck.
  • Approval workflows with visibility. Each request has an owner, a status and a clock, so waiting becomes measurable.
  • Out-of-hours coverage. Tasks that wait overnight for a person can be handled by an agent or a rule.
  • Content and publishing pipelines. Teams that bottleneck on repetitive publishing steps can adopt WordPress publishing automation to keep work moving past manual handoffs.

For teams coordinating several automated steps, our article on AI workflow orchestration explains how to simulate control flows before they go live, and our overview of must-have automation tools for business covers the tooling layer.

When automation makes a bottleneck worse

Automating a step that is not the constraint just feeds the real bottleneck faster. Automating a bad approval chain makes a bad chain run quicker. So the sequence stays fixed: find the constraint, redesign the flow, then automate. Automation also needs a human path for exceptions, or the exceptions become the new queue.

Off-the-shelf tools versus a system built around your process

Many bottlenecks persist because the process spans three or four tools that were never designed to work together. Each subscription solves a local problem, and the gaps between them stay manual. Wrike's project guide attributes bottleneck causes to systems, such as old, slow or obsolete software, and to performers stretched too thin. When the constraint is a system, a tailored build can remove it at the root: one admin system, one database, one set of rules for who owns what at each handoff.

That is the logic behind replacing a patchwork with custom software. You define the workflow first, then build the software to enforce it, measure it and show where work waits. For UAE and GCC businesses in regulated sectors, the workflow also has to carry audit trails and approval records. Planning for that at the design stage is far cheaper than adding it later.

How Proud Lion Studios builds the fix

Proud Lion Studios is a Dubai-based custom technology studio. A 16-person in-house team covering full-stack, backend, AI, design, 3D and game development delivers each build with no outsourcing, so the people who map your workflow are the people who build it. For bottleneck work, the relevant services are:

Proud Lion Studios

If you already know where work piles up, a short call is enough to scope a first build. You can also message us on WhatsApp at +971 54 757 8282.

Our perspective

Most clients arrive describing a tool problem. "Our spreadsheet is slow", "we need a dashboard", "we need an AI agent". When we map the work, the real issue is usually a handoff nobody owns.

We start with the flow, not the technology. Where does work wait, who is it waiting for, and what does the next step actually need? Only then do we decide whether the answer is a rule, an integration, an admin panel or an AI agent.

This is why one team matters. When the same in-house group designs the workflow, builds the backend and ships the interface, nothing gets lost between architecture and launch. Handoffs between agencies are bottlenecks too, and we would rather remove them than create them.

Our formula is simple: find the constraint, redesign the step, automate what is repetitive, keep people on judgment. Tailored, scalable and built to be measured, so the next bottleneck is visible the day it appears.

Amal

FAQ

How do you find bottlenecks in a process?

Map every step including handoffs, then measure how long work waits before each step as well as how long it takes. The step with a persistent queue in front of it and idle steps behind it is your constraint. If your work runs through software, event logs can confirm this with timestamps.

How do you optimize a workflow?

Start with the bottleneck, because improving any other step has little effect on output. Classify it as a resource or task bottleneck, question whether the delay adds value, shorten or parallelize sequences, and add slack. Automate only after the flow is redesigned.

Can automation create new bottlenecks?

Yes, if it speeds up a step that is not the constraint or if it keeps a poor handoff structure in place. McKinsey and Deloitte both note that AI on top of unchanged coordination patterns makes the process faster without removing the delay. Redesign first, then automate.

How do I know when I need custom software?

When the bottleneck sits in the gaps between several tools, or in manual steps no existing product covers, a system built around your own process is the cleaner answer. If you want a view on what that would involve for your workflow, we offer a free discovery call.

Book your free discovery call at proudlionstudios.com/contact, or message us on WhatsApp at +971 54 757 8282.

Sources